{"title":"1973-87 C10 Body \/ Exterior","description":"","products":[{"product_id":"cab-mounts","title":"Billet Aluminum Cab Mounts, 1973-87 C10","description":"\u003cp\u003e\u003cspan\u003eThese billet aluminum cab mounts are a factory replacement for your 1973-87 Chevy C\/10.  \u003c\/span\u003e\u003cspan\u003eThe mounts are machined from T6061 aluminum and feature stainless steel hardware.  The aluminum mount sits directly on top of the frame just as the original mount.  One oversized washer sits on top of the aluminum mount and will keep the body from digging into the aluminum.  One large 1\/4” thick washer goes onto the bolt and passed up through the frame bracket.  There are no other lower parts to these mounts.  \u003c\/span\u003e\u003cb\u003ePLEASE MAKE SURE THAT YOU USE PLENTY OF ANTISEIZE!!\u003c\/b\u003e\u003cspan\u003e  If you do not, the stainless bolt will seize on the nut and you will have to cut the bolt off!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eDisclaimer:\u003c\/strong\u003e  These cab mounts will solid mount the cab to the chassis.  If you do not box or reinforce your chassis there could be long term damage to the cab mount supports.  That being said, confirm that your cab floor, cab support rails, and inner rockers are solid before installation.  Rest assured that if you have a boxed frame or aftermarket frame with a good cab, there is no danger.  We have had these cab mounts installed in our truck for 6 years of racing now with no issue.  There is also no noticeable increase to NVH with these cab mounts.  Only if you have solid engine mounts or something contacting the frame will the resonance transmit into the cab.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncrease chassis rigidity by using the cab as a superstructure.\u003c\/li\u003e\n\u003cli\u003eProvide a solid platform for a roll cage\u003c\/li\u003e\n\u003cli\u003eIn stock and ready to ship\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003e\n\u003ca title=\"Level 7 Liability Waiver\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1356\/0921\/files\/Level_7_Motorsports_LLC_Liability_Waiver_RELEASE_OF_LIABILITY.pdf?16751810778467196783\" target=\"_blank\"\u003ePlease read our liability waiver before purchase,\u003c\/a\u003e click to see PDF. \u003c\/li\u003e\n\u003cli\u003e\n\u003ca title=\"73-87 Cab Mount Instructions\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1356\/0921\/files\/73-80_Cab_Mount_Instructions.pdf?v=1613771594\"\u003eCab Mount Instructions\u003c\/a\u003e \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"Level 7 Motorsports","offers":[{"title":"Black Anodized","offer_id":21923822081,"sku":"LEV7380CM","price":425.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1356\/0921\/products\/73-87cabmounts.jpg?v=1655329498"},{"product_id":"c10-aluminum-polycarbonate-tailgate-mounted-wing-73-87","title":"C10 Aluminum \/ Polycarbonate Tailgate Mounted Wing, 1973-87","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eOur C10 rear wing is made water jet cut from 6061 aluminum and scratch resistant polycarbonate.  It attaches to the tailgate via thread inserts and stainless 1\/4” fasteners.  So you will have to drill holes in your tailgate.  Our wing kits come with aluminum turnbuckles that mount at each end of the tailgate to help support the wing at speed.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMade is the USA\u003c\/li\u003e\n\u003cli\u003eIncrease down force \/ traction in the rear\u003c\/li\u003e\n\u003cli\u003eAlso available in black powder coat with a 2 week lead time.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca rel=\"noopener noreferrer\" title=\"Level 7 Motorsports Tailgate Mounted Wing Installation Instructions\" href=\"https:\/\/levelsevenmotorsports.com\/wp-content\/uploads\/2023\/03\/C10-Wing-Instructions-.pdf\" target=\"_blank\"\u003ePlease click here for product instructions.\u003c\/a\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"Level 7 Motorsports","offers":[{"title":"73-87 C10 Natural Brushed Aluminum Tailgate Mounted Wing","offer_id":40239329771696,"sku":"LEV7387W","price":510.0,"currency_code":"USD","in_stock":true},{"title":"73-87 C10 Satin Black Powder Coat w\/ Black Anodized Hardware, Wing","offer_id":40239329804464,"sku":"LEV7387WB","price":610.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1356\/0921\/products\/MG_1153.jpg?v=1672418450"},{"product_id":"trackspec-73-87-c10-hood-louvers","title":"Level 7 Motorsports 1973-87 C10 Hood Louvers","description":"\u003cp\u003e\u003cspan\u003eWe are proud to offer Trackspec hood Louvers for your C10 truck!  Not only are we a dealer for Trackspec but we worked directly with John to provided the perfect template for each c10 hood.  The primary object of these louvers is to decrease under hood pressure and allow the front of the truck to stay closer to the ground at high speeds.  The front of your truck is high off the ground and very flat compared to a sports car.  At-speed air is forced through the radiator and pressurizes the engine bay.  The air is forced to escape out from under the truck thus creating lift.  These louvers allow the air pressure to escape up out of the hood and mix with air traveling over the hood and truck.  This keeps the front of the truck and hood more stable.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMade of T6061 in the USA\u003c\/li\u003e\n\u003cli\u003eIncreased aerodynamics\u003c\/li\u003e\n\u003cli\u003eReduced under hood temperatures \u003c\/li\u003e\n\u003cli\u003eIn stock and ready to ship\u003c\/li\u003e\n\u003cli\u003eShip powder coated satin black\u003c\/li\u003e\n\u003cli\u003eIncludes install instructions and black rivets\u003c\/li\u003e\n\u003cli\u003eAt widest parts dimensions are: 26.75\"x16\" \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"trackspec","offers":[{"title":"Default Title","offer_id":35092356890781,"sku":"73-87 C10 Hood Louvers","price":359.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1356\/0921\/products\/73hoodloovers.jpg?v=1655320999"},{"product_id":"level-7-motorsports-arp-large-beauty-washers","title":"Level 7 Motorsports ARP Large Beauty Washers","description":"\u003cp\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eLevel 7 Motorsports aluminum beauty washers are perfect for anyone looking for a cleaner mounting solution.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePerfect for an engine bay, chassis mounted brackets, or even small parts.\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eBillet 6061 Aluminum\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eAnodized Either Clear or Black, 5\/16\" beauty washers are powdercoated instead of anodized. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eSold in Sets of x5\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eStainless Hardware Included\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eUpgrade From Flat Washers or Painted Fasteners\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eMade in the USA\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Level 7 Motorsports","offers":[{"title":"Black \/ 5\/16","offer_id":40834822111408,"sku":"LEVBWLG516B","price":65.0,"currency_code":"USD","in_stock":true},{"title":"Black \/ 3\/8","offer_id":40834822176944,"sku":"LEVBWLG38B","price":78.0,"currency_code":"USD","in_stock":true},{"title":"Clear Aluminum \/ 5\/16","offer_id":40834822209712,"sku":"LEVBWLG516A","price":65.0,"currency_code":"USD","in_stock":true},{"title":"Clear Aluminum \/ 3\/8","offer_id":40834822275248,"sku":"LEVBWLG38A","price":78.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1356\/0921\/products\/beautywashers2-black.jpg?v=1634322265"},{"product_id":"level-7-motorsports-low-profile-beauty-washers","title":"Level 7 Motorsports Low Profile Beauty Washers","description":"\u003cp\u003eLevel 7 Motorsports aluminum beauty washers are perfect for anyone looking for a cleaner mounting solution.  Perfect for an engine bay, chassis mounted brackets, or even small parts.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eBillet 6061 Aluminum\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAnodized Either Clear or Black\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSold in Sets of x5\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eStainless Hardware Included\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eUpgrade From Flat Washers or Painted Fasteners\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMade in the USA\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Level 7 Motorsports","offers":[{"title":"Black \/ 1\/4\"-20 x 3\/4\"","offer_id":42504022229168,"sku":"LEVBWLP14B","price":35.99,"currency_code":"USD","in_stock":true},{"title":"Black \/ 5\/16\"-18 x 3\/4\"","offer_id":40834830565552,"sku":"LEVBWLP516B","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Black \/ 3\/8\"-16 x 1\"","offer_id":40834830696624,"sku":"LEVBWLP38B","price":40.99,"currency_code":"USD","in_stock":true},{"title":"Clear Aluminum \/ 1\/4\"-20 x 3\/4\"","offer_id":42504022261936,"sku":"LEVBWLP14A","price":35.99,"currency_code":"USD","in_stock":true},{"title":"Clear Aluminum \/ 5\/16\"-18 x 3\/4\"","offer_id":40834830762160,"sku":"LEVBWLP516A","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Clear Aluminum \/ 3\/8\"-16 x 1\"","offer_id":40834830860464,"sku":"LEVBWLP38A","price":40.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1356\/0921\/products\/lowprofilebeautywashers.jpg?v=1634671449"},{"product_id":"stepside-wing","title":"Stepside C10 Aluminum \/ Polycarbonate Tailgate Mounted Wing, 1954-87","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003eOur C10 rear wing is made water jet cut from 5052 aluminum and scratch resistant polycarbonate.  It attaches to the tailgate via thread inserts and stainless 1\/4” fasteners.  So you will have to drill holes in your tailgate.  Our wing kits come with aluminum turnbuckles that mount at each end of the tailgate to help support the wing at speed.\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMade is the USA\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eIncrease down force \/ traction in the rear\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAlso available in black powder coat with a 2 week lead time\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Level 7 Motorsports","offers":[{"title":"Raw","offer_id":41086633148592,"sku":"LEVSSW","price":575.0,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":41086633181360,"sku":"LEVSSWB","price":675.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1356\/0921\/products\/stepside2.jpg?v=1676043485"},{"product_id":"tow-hook","title":"Billet Tow Hook","description":"\u003cp\u003eWe are happy to be a dealer for Rennline.  We have been installing and selling these V2 hooks for a few years now with great success.  While extremely well designed and able to be used in nearly any situation, these are a universal part and will require a screw in receiver.  We have sell the V2 hook accompanied with our severe duty weld nut.  While we would like to sell a receiver for trucks there are too many chassis and bumper options.  \u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"sidenavTxt\"\u003eRev2 Rennline Folding Tow Hook\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eComes w\/ Level 7 Severe Duty Weld Nut\u003c\/li\u003e\n\u003cli\u003eFully machined tapered design with chamfered edges to eliminate cutting tow straps\u003c\/li\u003e\n\u003cli\u003eIncreased Side Load Capacity\u003c\/li\u003e\n\u003cli\u003eAbility to time the Tow Hook in any position\u003c\/li\u003e\n\u003cli\u003eEasy Length Adjustment\u003c\/li\u003e\n\u003cli\u003eFlawless brushed surface finish\u003c\/li\u003e\n\u003cli\u003e300 series stainless steel tow loop\u003c\/li\u003e\n\u003cli\u003eMachined \"TOW\" Graphics\u003c\/li\u003e\n\u003cli\u003eGo Pro Camera mount compatible (Mount Sold Separately)\u003c\/li\u003e\n\u003cli\u003eThe original folding tow hook that has proven itself thousands of times over the years\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rennline","offers":[{"title":"Default Title","offer_id":41115533639856,"sku":"","price":180.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1356\/0921\/products\/towhook.jpg?v=1639760013"},{"product_id":"firewall-grommet-hardware","title":"Firewall Grommet w\/ Hardware","description":"\u003cp\u003eWe have been using these split grommets for years now and love them!  They come without a hole but we can punch whatever size hole you specify.  Simply measure the diameter of harness you need to isolate then subtract 25%.  If you have a 1\" harness I would suggest a 3\/4\" hole.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSold Individually\u003c\/li\u003e\n\u003cli\u003ePlease Select Center Hole Size.\u003c\/li\u003e\n\u003cli\u003eIncludes Mounting Hardware\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Level 7 Motorsports","offers":[{"title":"No Hole Please.","offer_id":41202639634608,"sku":"SplitFirewallGrommet","price":52.0,"currency_code":"USD","in_stock":true},{"title":"1\/4\" Hole","offer_id":41202635210928,"sku":"SplitFirewallGrommet-1\/4","price":52.0,"currency_code":"USD","in_stock":true},{"title":"5\/16\" Hole","offer_id":41202635243696,"sku":"SplitFirewallGrommet-5\/16","price":52.0,"currency_code":"USD","in_stock":true},{"title":"3\/8\" Hole","offer_id":41202635276464,"sku":"SplitFirewallGrommet-3\/8","price":52.0,"currency_code":"USD","in_stock":true},{"title":"7\/16\" Hole","offer_id":41202635309232,"sku":"SplitFirewallGrommet-7\/16","price":52.0,"currency_code":"USD","in_stock":true},{"title":"1\/2\" Hole","offer_id":41202635342000,"sku":"SplitFirewallGrommet-1\/2","price":52.0,"currency_code":"USD","in_stock":true},{"title":"9\/16\" Hole","offer_id":41202635374768,"sku":"SplitFirewallGrommet-9\/16","price":52.0,"currency_code":"USD","in_stock":true},{"title":"5\/8\" Hole","offer_id":41202635407536,"sku":"SplitFirewallGrommet-5\/8","price":52.0,"currency_code":"USD","in_stock":true},{"title":"3\/4\" Hole","offer_id":41202635440304,"sku":"SplitFirewallGrommet-3\/4","price":52.0,"currency_code":"USD","in_stock":true},{"title":"7\/8\" Hole","offer_id":41202635473072,"sku":"SplitFirewallGrommet-7\/8","price":52.0,"currency_code":"USD","in_stock":true},{"title":"1\" Hole","offer_id":41202635538608,"sku":"SplitFirewallGrommet-1","price":52.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1356\/0921\/products\/sealsitgrommet.jpg?v=1639760263"},{"product_id":"1973-87-c10-door-strikers","title":"1973-87 C10 Billet Door Strikers","description":"\u003cp\u003eElite Manufacturing Billet Door Striker Set.  Simply add another highly detailed part to your build or replace your worn out door strikers to get your closing nice again.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1973-87 C10, Suburban, etc.\u003c\/li\u003e\n\u003cli\u003eMachined Billet Aluminum\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eIncludes Billet Washers, Strikers, and x1 sets of Plastic Wear Sleeves\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Level 7 Motorsports","offers":[{"title":"Raw","offer_id":41267910279344,"sku":"LEV73STRKR","price":185.0,"currency_code":"USD","in_stock":true},{"title":"Black w\/ Machined Windows","offer_id":41267910312112,"sku":"LEV73STRKB","price":199.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1356\/0921\/products\/blackdoorstrikers.jpg?v=1655898693"},{"product_id":"tow-hook-go-pro-mount","title":"Tow Hook Go Pro Mount","description":"\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eIn todays racing and track events, cameras are everywhere. They have become a very valuable learning tool for you to get the most out of your track experience. One of the most exciting views you can capture is at bumper level. It gives you the true sensation of speed, especially when you are dicing in and out of traffic. Many people use(or did use) suction cup mounts to achieve this perspective. The issues with these are simple, they destroy paint, they fall off, and are gradually becoming banned from events due to the Flying Debris factor. \u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eRennline's GoPro Camera Mount eliminates all of these issues. It mounts directly to your Rennline folding tow hook, giving you the ultimate vantage point you require without effecting the functionality of the hook. Machined from billet aluminum and equipped with standard Go-Pro style attachment point. . \u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cb data-mce-fragment=\"1\"\u003eNote:\u003c\/b\u003e\u003cspan data-mce-fragment=\"1\"\u003e GoPro Camera, Camera Case, Tow Hook, and thumb screw not included. This unit is designed to work with the REV2 Folding Tow Hook only.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca title=\"Billet Tow Hook\" href=\"https:\/\/level-7-motorsports.myshopify.com\/products\/tow-hook\"\u003eBillet Tow Hook\u003c\/a\u003e\u003c\/p\u003e","brand":"Level 7 Motorsports","offers":[{"title":"Default Title","offer_id":41559030038704,"sku":"REN-PH05","price":85.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1356\/0921\/products\/gopromount.jpg?v=1655328376"},{"product_id":"73-87-billet-door-handle","title":"73-87 C10 GSI Billet Door Handle\/ Raw Finish w\/ Groove Detail","description":"\u003cp\u003e\u003cspan\u003eThese Billet Door Handles are for your ’73-87 Chevy Square Body. GSI has designed and billet machined these Door Handles in-house.  In the truck scene, it's hard to set yourself apart from the crowd but these Billet Door Handles can add a special finishing touch to your project. They are also available in different finishes such as Polished Aluminum and Powder Coat Black with a black or chrome push button. \u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eGSI’s Billet Door Handles are sold in a pair and come complete with all new internals. These are ready to be installed right out of the box.\u003c\/span\u003e\u003c\/p\u003e","brand":"Level 7 Motorsports","offers":[{"title":"Default Title","offer_id":42304551223472,"sku":"130-5309-G-R","price":449.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1356\/0921\/products\/73-87billetdoorhandle.jpg?v=1673382129"},{"product_id":"4-wider-wheel-tubes-for-73-87-c10","title":"4\" Wider Wheel Tubs for 73-87 C10","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003eRealizing the demand for more tire clearance, Auto Metal Direct has the answer. These are Level 7's Wheel Tubs of choice when building a custom\/performance street truck. These Wheel Tubs have an OEM look with 4 more inches of clearance and more than enough room for most tire applications. You can add these to your modified factory floor or combine them with AMD's Full Bed Floor with the widened wheel tub area. \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan\u003eAuto Metal Direct, 4\" wider wheelhouses for the 73-87 Chevy GMC Fleetside Truck and 73-91 Chevy GMC Blazer Jimmy. Fits both the LH (driver) and RH (passenger) side. \u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan\u003eSold with required hardware kit. \u003cspan class=\"productdescription\" data-mce-fragment=\"1\" itemprop=\"description\"\u003eThis 52 piece kit includes all the necessary screws, nuts, bolts and washers to install both bed wheelhouses. \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eSOLD AS A SET.\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Auto Metal Direct","offers":[{"title":"Default Title","offer_id":42469392154800,"sku":"760-4073-4  761-4073-4s","price":389.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1356\/0921\/products\/73-87amdtub1.jpg?v=1676063951"},{"product_id":"bed-floor-assembly-4inch-wider-tubs-for-73-87-short-bed-fleetside","title":"Bed Floor Assembly - 4\" Wider Tubs - For 73-87 Short Bed Fleetside","description":"\u003cp\u003eIntroducing Auto Metal Direct's reproduction bed floor assembly for the 1973-87 Chevrolet \/ GMC C\/K Squarebody Short Bed Fleetside model trucks with accommodation for \u003cstrong\u003e4\" wider wheel tubs\u003c\/strong\u003e. \u003cspan style=\"color: #ff2a00;\"\u003e\u003cem\u003e(Wheel Tubs Sold Separately)\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eStamped from high quality heavy gauge steel, each bed floor assembly comes complete with cross sills, tail panel and reinforcements already attached. This bed floor features a one-piece OE correct bed floor skin and provisions to directly bolt in AMD's 4\" wider tubs. \u003cspan style=\"color: #ff2a00;\"\u003eThis floor will not work with the factory width wheel tubs.\u003c\/span\u003e Arrives EDP coated to help protect against rust and corrosion prior to installation.\u003c\/p\u003e\n\u003cp\u003eWith the introduction of AMD's new 4\" wider tub bed floor, you will save a lot in labor over modifying a factory spec floor to accommodate the wider tubs. This will reduce fabrication time and a cleaner OE appearance over all in your truck. \u003c\/p\u003e\n\u003cp\u003eSold with all required installation hardware. \u003cspan data-mce-fragment=\"1\" itemprop=\"description\" class=\"productdescription\"\u003eBed to Frame Mounting Hardware Kit - 32pcs 2 Long Bolts 6 Short Bolts - 73-87 Chevy GMC C\/K Squarebody Pickup Truck - Fleetside. This kit is designed to replace your factory hardware and includes 8 OE style carriage bolts, washers, lock washers and nuts. Works with Short Bed or Long Bed models. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\" itemprop=\"description\" class=\"productdescription\"\u003e\u003cstrong\u003eThis item, due to its size and weight, is much more susceptible to shipping damage. To reduce damages and ensure delivery of good condition products, this item will be shipped in a custom wooden crate. Crate fees are included in the truck freight price.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\" itemprop=\"description\" class=\"productdescription\"\u003e\u003cstrong\u003e\u003cmeta charset=\"utf-8\"\u003eOversized item shipping costs apply for this item (calculated at checkout).  Ships Truck Freight\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Auto Metal Direct","offers":[{"title":"Default Title","offer_id":42487945461936,"sku":"790-4073-64s  727-4073-2s","price":1469.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1356\/0921\/products\/amd73-87floor1.jpg?v=1676317675"},{"product_id":"budget-1-4-beauty-washers","title":"Budget 1\/4\" Beauty Washers","description":"\u003cp data-mce-fragment=\"1\"\u003eThese 1\/4\" aluminum beauty washers are perfect for anyone looking for a cleaner mounting solution, and are budget friendly!\u003cbr\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePerfect for an engine bay, chassis mounted brackets, or even small parts.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAvailable in black only\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSold in sets of 5\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHardware included\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Level 7 Motorsports","offers":[{"title":"Default Title","offer_id":42654481809584,"sku":"LEV14BBW","price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1356\/0921\/files\/Screenshot2023-05-09at12.33.15PM.png?v=1683653834"},{"product_id":"purefit-indoor-c10-car-cover-squarebody","title":"Purefit Indoor C10 Car Cover","description":"\u003cdiv class=\"pf-c\" style=\"--c-xs: 12; --c-sm: 6; --c-md: 6; --c-lg: 6;\" data-mce-fragment=\"1\"\u003e\n\u003cdiv data-pf-type=\"Column\" class=\"sc-gXRojI kCnmwO pf-25_\" data-mce-fragment=\"1\"\u003e\n\u003ch3 data-pf-type=\"Heading\" class=\"sc-bSqaIl iXTDAP pf-110_\" data-mce-fragment=\"1\"\u003e\n\u003cspan style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003ePurfits custom \u003c\/span\u003e\u003cstrong style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003eindoor\u003c\/strong\u003e\u003cspan style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003e covers are the pinnacle of luxury, they are designed to hug and hold every contour of your vehicle. The look and feel is unbeatable while protecting your car at the same time. A fantastic cover that breathes and stops dings inside your garage for years to come.  \u003c\/span\u003e\u003cspan data-pf-type=\"Text\" class=\"sc-BHvUt fJlZte pf-112_\" data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\n\u003c\/h3\u003e\n\u003cul style=\"--text-indent: 0; --line-spacing: 10px;\" data-pf-type=\"List\" class=\"sc-gHjyzD dQAIat pf-26_\" data-mce-fragment=\"1\"\u003e\n\u003cli data-pf-type=\"List.Item\" class=\"sc-itWPBs dKPonY pf-27_\" data-mce-fragment=\"1\"\u003e\u003cspan data-pf-type=\"Text\" class=\"sc-BHvUt fJlZte pf-29_\" data-mce-fragment=\"1\"\u003ePurfit’s exclusive \u0026amp; famous indoor stretch fabric\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-pf-type=\"List.Item\" class=\"sc-itWPBs dKPonY pf-30_\" data-mce-fragment=\"1\"\u003e\n\u003ci class=\"sc-jlsrNB eRpuTj pf-31_ pfa pfa-check-circle\" data-pf-type=\"Icon\" data-mce-fragment=\"1\"\u003e\u003c\/i\u003e\u003cspan data-pf-type=\"Text\" class=\"sc-BHvUt fJlZte pf-32_\" data-mce-fragment=\"1\"\u003ePolycotton knit with spandex added\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli data-pf-type=\"List.Item\" class=\"sc-itWPBs dKPonY pf-33_\" data-mce-fragment=\"1\"\u003e\n\u003ci class=\"sc-jlsrNB eRpuTj pf-34_ pfa pfa-check-circle\" data-pf-type=\"Icon\" data-mce-fragment=\"1\"\u003e\u003c\/i\u003e\u003cspan data-pf-type=\"Text\" class=\"sc-BHvUt fJlZte pf-35_\" data-mce-fragment=\"1\"\u003eUnique 4way stretch for the ultimate fit\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli data-pf-type=\"List.Item\" class=\"sc-itWPBs dKPonY pf-36_\" data-mce-fragment=\"1\"\u003e\n\u003ci class=\"sc-jlsrNB eRpuTj pf-37_ pfa pfa-check-circle\" data-pf-type=\"Icon\" data-mce-fragment=\"1\"\u003e\u003c\/i\u003e\u003cspan data-pf-type=\"Text\" class=\"sc-BHvUt fJlZte pf-38_\" data-mce-fragment=\"1\"\u003eFollows the exact contours of your vehicle\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli data-pf-type=\"List.Item\" class=\"sc-itWPBs dKPonY pf-39_\" data-mce-fragment=\"1\"\u003e\n\u003ci class=\"sc-jlsrNB eRpuTj pf-40_ pfa pfa-check-circle\" data-pf-type=\"Icon\" data-mce-fragment=\"1\"\u003e\u003c\/i\u003e\u003cspan data-pf-type=\"Text\" class=\"sc-BHvUt fJlZte pf-41_\" data-mce-fragment=\"1\"\u003e100% Cotton fleece on the inside\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli data-pf-type=\"List.Item\" class=\"sc-itWPBs dKPonY pf-42_\" data-mce-fragment=\"1\"\u003e\n\u003ci class=\"sc-jlsrNB eRpuTj pf-43_ pfa pfa-check-circle\" data-pf-type=\"Icon\" data-mce-fragment=\"1\"\u003e\u003c\/i\u003e\u003cspan data-pf-type=\"Text\" class=\"sc-BHvUt fJlZte pf-44_\" data-mce-fragment=\"1\"\u003eAvailable in 3 colours \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli data-pf-type=\"List.Item\" class=\"sc-itWPBs dKPonY pf-45_\" data-mce-fragment=\"1\"\u003e\n\u003ci class=\"sc-jlsrNB eRpuTj pf-46_ pfa pfa-check-circle\" data-pf-type=\"Icon\" data-mce-fragment=\"1\"\u003e\u003c\/i\u003e\u003cspan data-pf-type=\"Text\" class=\"sc-BHvUt fJlZte pf-47_\" data-mce-fragment=\"1\"\u003e4year Warranty\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli data-pf-type=\"List.Item\" class=\"sc-itWPBs dKPonY pf-48_\" data-mce-fragment=\"1\"\u003e\n\u003ci class=\"sc-jlsrNB eRpuTj pf-49_ pfa pfa-check-circle\" data-pf-type=\"Icon\" data-mce-fragment=\"1\"\u003e\u003c\/i\u003e\u003cspan data-pf-type=\"Text\" class=\"sc-BHvUt fJlZte pf-50_\" data-mce-fragment=\"1\"\u003eFabric is made 185cm wide so less seams\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli data-pf-type=\"List.Item\" class=\"sc-itWPBs dKPonY pf-48_\" data-mce-fragment=\"1\"\u003e\u003cspan data-pf-type=\"Text\" class=\"sc-BHvUt fJlZte pf-50_\" data-mce-fragment=\"1\"\u003eIf your C10 has a custom wing or a level 7 wing we will need to know.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Purefit","offers":[{"title":"1973-87 Squarebody","offer_id":45122491383984,"sku":"Purefit-Square-1","price":625.0,"currency_code":"USD","in_stock":true},{"title":"1967-72 C10","offer_id":45122491416752,"sku":"Purefit-1967-72","price":625.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1356\/0921\/files\/purefitcover.png?v=1688414873"},{"product_id":"bolt-in-hvac-delete-panel-1973-1987-chevrolet-and-gmc-c-k-trucks","title":"Bolt-In HVAC Delete Panel","description":"\u003cdiv class=\"full_description\" data-mce-fragment=\"1\"\u003eThe Detroit Speed Bolt-in HVAC delete plate smooths your factory firewall when installing an aftermarket air conditioning system in your Squarebody Pickup. This 18-gauge steel panel is stamped with pride in the USA. Fits both factory Air Conditioning and Heat Only Firewalls of 1973-1986 GM C\/K Trucks and 1987-1991 R\/V Trucks.\u003c\/div\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eFeatures:\u003c\/h3\u003e\n\u003cul class=\"productpage_list\" data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eStamped 18-gauge Steel\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHVAC Delete for GM Squarebody Trucks\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFor both factory A\/C \u0026amp; heat only GM Trucks\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDue to vehicle variation, mounting hole modification may be necessary. Drilling Required Fits both 2WD and 4WD Trucks Applications: 1973-1986 Chevrolet \/ GMC C\/K Trucks 1987-1991 Chevrolet \/ GMC R\/V Trucks 1973-1991 Chevrolet Blazer \/ GMC Jimmy 1973-1991 Chevrolet \/ GMC Suburban\u003c\/p\u003e","brand":"Detroit Speed","offers":[{"title":"Default Title","offer_id":43003926872240,"sku":"010905DS","price":134.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1356\/0921\/files\/HVACdeletepanel.png?v=1702073927"},{"product_id":"ring-brothers-universal-round-hood-pin-kit","title":"Ring Brothers Universal Round Hood Pin Kit","description":"\u003cmeta charset=\"utf-8\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eFasten your hood securely in style with an artesian designed Ringbrothers Hood Pin Kit! Featuring a unique stainless steel locking pin that adjusts for different hood angles, providing superior fit and function. Ringbrothers Hood Pin Kits are designed to be universal, while only requiring minor modifications for installations. \u003c\/span\u003e\u003cbr\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e6061 Billet Aluminum\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHardware Kit included\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDirect Replacement\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSold as a Pair\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBlack Anodized or Natural Silver Finish\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePlease note that the locking pins may not be the same color as shown in the picture. Subject to market availability.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Level 7 Motorsports","offers":[{"title":"Black","offer_id":43063927996592,"sku":"9111B","price":275.0,"currency_code":"USD","in_stock":true},{"title":"Natural","offer_id":43063928029360,"sku":"9111N","price":275.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1356\/0921\/files\/RBHoodPinsBlack.jpg?v=1704398535"},{"product_id":"ring-brothers-73-80-c10-billet-hood-hinges","title":"Ring Brothers 73-80 C10 Billet Hood Hinges","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eDesigned for use as a direct replacement, these hood hinges will require no alterations for vehicle installations. Whether you are using a fiberglass or steel hood, you will experience a smooth and effortless action due to the characteristics of a gas charged spring compared to an original mechanical spring. Ringbrothers hood hinges are machined from 6061-T6 billet aluminum and are available with a solid frame or an open air frame design for a truly distinguished look with uncompromised strength and durability.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e6061 Billet Aluminum\u003c\/li\u003e\n\u003cli\u003eHardware Kit \u0026amp; Gas Struts Included\u003c\/li\u003e\n\u003cli\u003eDirect Replacement\u003c\/li\u003e\n\u003cli\u003eSold as a Pair\u003c\/li\u003e\n\u003cli\u003eNatural or Black Finish\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ring Brothers","offers":[{"title":"Natural \/ Air Frame \/ Steel","offer_id":43064006869168,"sku":"1174NS","price":800.0,"currency_code":"USD","in_stock":true},{"title":"Natural \/ Air Frame \/ Fiberglass","offer_id":43064006901936,"sku":"1174NF","price":800.0,"currency_code":"USD","in_stock":true},{"title":"Natural \/ Solid Frame \/ Steel","offer_id":43064006934704,"sku":"1173NS","price":800.0,"currency_code":"USD","in_stock":true},{"title":"Natural \/ Solid Frame \/ Fiberglass","offer_id":43064006967472,"sku":"1173NF","price":800.0,"currency_code":"USD","in_stock":true},{"title":"Black \/ Air Frame \/ Steel","offer_id":43064007000240,"sku":"1174BS","price":850.0,"currency_code":"USD","in_stock":true},{"title":"Black \/ Air Frame \/ Fiberglass","offer_id":43064007033008,"sku":"1174BF","price":850.0,"currency_code":"USD","in_stock":true},{"title":"Black \/ Solid Frame \/ Steel","offer_id":43064007065776,"sku":"1173BS","price":850.0,"currency_code":"USD","in_stock":true},{"title":"Black \/ Solid Frame \/ Fiberglass","offer_id":43064007098544,"sku":"1173BF","price":850.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1356\/0921\/files\/73-80airframeblk1.jpg?v=1704401145"},{"product_id":"pre-order-billet-contoured-bed-floor-fuel-fill","title":"Contoured Bed Floor Fuel Fill","description":"\u003ch2 style=\"text-align: left;\"\u003e\u003cstrong\u003eLevel 7 Motorsports - Contoured Bed Floor Fuel Fill\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThere are plenty of fuel fills on the market, but this is the first part designed to contour your bed floor.  Each model of fuel fill has been designed by first 3D scanning the factory bed floor.  Many hours to design and 3D printing helped us ensure perfect fitment to the factory floor.  We have also raised the fill to allow for the most amount of room under the bed floor.  No longer do you have a 2\" barb sticking inches below the bed floor.  Each of our bed floor fills will come with a fuel safe, silicone hose section as well as clamps, installation hardware, and a 3D printed gasket!  The fills are available in a raw finish or a semi-gloss ceramic coating.  The black coating is UV resistant and will not fad like anodizing. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e:  Having the fuel fill contour the floor locks you into only being able to install in every \"valley\" of the floor.  So, of your fill lands in a peak it\u003cstrong\u003e will NOT line up\u003c\/strong\u003e.  However, if it is close, the silicone hose is pliable enough to compensate for that offset.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003ePremium quality\u003c\/li\u003e\n\u003cli\u003eBillet Aluminum\u003c\/li\u003e\n\u003cli\u003eCourted to fit your bed floor\u003c\/li\u003e\n\u003cli\u003eIncludes installation hardware, base gasket, hose, and clamps\u003c\/li\u003e\n\u003cli\u003eMade to order, lead time may be 2-4 weeks\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Level 7 Motorsports","offers":[{"title":"73-87 C10 \/ Raw Aluminum","offer_id":43770533806256,"sku":"LEV7387FUEL-RAW","price":665.0,"currency_code":"USD","in_stock":true},{"title":"73-87 C10 \/ Black Anodized","offer_id":43146950115504,"sku":"LEV7387FUEL-BLK","price":695.0,"currency_code":"USD","in_stock":true},{"title":"88-98 OBS \/ Raw Aluminum","offer_id":43770533839024,"sku":"LEVOBSFUEL-RAW","price":665.0,"currency_code":"USD","in_stock":true},{"title":"88-98 OBS \/ Black Anodized","offer_id":43146950181040,"sku":"LEVOBSFUEL-BLK","price":695.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1356\/0921\/files\/OBSfuelfill7.png?v=1706650052"},{"product_id":"hart-fab-73-87-c10-20-composite-inner-fenders","title":"Hart Fab 73-87 C10 Composite Inner Fenders","description":"\u003cp\u003e\u003cspan\u003e73-87 C10 Composite inner fenders. Hart Fab teamed up with the best in the composites industry to offer a direct replica of their popular steel inner fenders.  Now available in stylish and super light carbon fiber.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eCarbon fiber are available in either matte or gloss finish. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e73-87 Squarebody C10 Static drop inner fenders.  These inner fenders are designed for stock crossmember applications and some non extreme drop aftermarket crossmembers using a static drop, coil over, or airbag. These are ideal for bolt on suspensions. 5\/7 drops, QA1, ride tech coilover or air bag, etc. They've also been used in full chassis applications such as Roadster shop fast track.  \u003c\/p\u003e\n\u003cp\u003e Measuring 4 1\/4” from the fender pinch weld to the highest point of the tub these inner fenders will get you as low as you can go and still retain unmodified hood hinge on 73-80 or hood spring on 81-87. Provides and additional 3 1\/2\" clearance over original.\u003c\/p\u003e\n\u003cp\u003eThese\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eWILL NOT\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ework with factory heat or A\/C boxes at this time. Not designed for “lay frame” or “body dropped” applications. If you have any questions about your application please contact us before ordering. \u003c\/p\u003e\n\u003cp\u003eThese were molded off our 73-80 Version. If Installing in a 81-87 Application minor additional trimming of the side panel may be necessary. \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003eIf you have any questions about your application please contact us before ordering.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e***THIS ITEM HAS A 4-6 WEEK LEAD TIME.  Any orders cancelled before quoted lead time are subject to a restocking fee.***\u003c\/strong\u003e\u003c\/p\u003e","brand":"Hart Fab","offers":[{"title":"Carbon Fiber - Matte","offer_id":44505827770544,"sku":null,"price":1495.0,"currency_code":"USD","in_stock":true},{"title":"Carbon Fiber - Gloss","offer_id":44505827803312,"sku":null,"price":1395.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1356\/0921\/files\/HartFabSBInnerFender1.jpg?v=1749485583"},{"product_id":"73-80-c-10-slammed-inner-fenders","title":"73-80 C-10 Slammed Inner Fenders","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cspan\u003e73-80 C-10 inner fenders 100% bolt in. Designed to lay frame on a 265\/35r22 or equivalent tire using aftermarket bolt in cross members or chassis'. Retains factory hood hinge and battery tray (with minor modification). Constructed from 18 gauge steel offered in raw finish only. Includes 2 inner fender assemblies and 2 core support mounting brackets. Works with aftermarket air conditioning. Will not clear factory heat or a\/c boxes. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eBody dropped applications available. If you have a chassis you are body dropped.  Please contact us for more info. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eParts are built to order, Please refer to header at top of page for most up to date lead times!!\u003c\/strong\u003e\u003c\/p\u003e","brand":"Hart Fab","offers":[{"title":"Standard \/ Shaved (No Factory Welded Brake Bracket)","offer_id":45008996991152,"sku":"sku-15884246745152","price":995.0,"currency_code":"USD","in_stock":true},{"title":"Standard \/ Stock","offer_id":45008997023920,"sku":"sku-40219333001251","price":995.0,"currency_code":"USD","in_stock":true},{"title":"Single Panel \/ Shaved (No Factory Welded Brake Bracket)","offer_id":45008997056688,"sku":"sku-15885845299264","price":995.0,"currency_code":"USD","in_stock":true},{"title":"Single Panel \/ Stock","offer_id":45008997089456,"sku":"sku-40219333034019","price":995.0,"currency_code":"USD","in_stock":true},{"title":"Smooth\/No Bead \/ Shaved (No Factory Welded Brake Bracket)","offer_id":45008997122224,"sku":"sku-40219332739107","price":945.0,"currency_code":"USD","in_stock":true},{"title":"Smooth\/No Bead \/ Stock","offer_id":45008997154992,"sku":"sku-40219333066787","price":945.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1356\/0921\/files\/image_59d5c815-8835-4d9d-a77c-b10407882dce.jpg?v=1773352602"},{"product_id":"81-87-c-10-slammed-inner-fenders","title":"81-87 C-10  Slammed Inner fenders","description":"\u003cdiv class=\"generic-label-header\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-6 col-md-8 col-xs-10 col-lg-offset-3 col-md-offset-2 col-xs-offset-1\"\u003e\n\u003cdiv class=\"section-description\"\u003e\n\u003cdiv class=\"copy\"\u003e\n\u003cdiv id=\"ember837\" class=\"ember-view l-sites__edit-or-render is-rendering\"\u003e\n\u003cdiv data-bindattr-839=\"839\" data-ember-action=\"840\" class=\"l-sites__edit-or-render__render is-hover-enabled\"\u003e\n\u003cdiv id=\"ember842\" class=\"ember-view\"\u003e\u003cspan class=\"sites-render-textarea\"\u003e81-87 C10 inner fenders designed for trucks using aftermarket crossmembers or chassis' to lay frame on up to a 29\" Tall tire. 100 % bolt in design made of Tig welded 18 gauge steel. Offered in raw finish only. These will not work with factory hood springs or factory heat-a\/c boxes. Includes 2 inner fender assemblies and necessary mounting brackets.  \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv class=\"ember-view\"\u003e\n\u003cspan class=\"sites-render-textarea\"\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ember-view\"\u003eBody dropped applications available. If you have a chassis you are body dropped. Please contact us for more info.\u003cbr\u003e\u003cspan class=\"sites-render-textarea\"\u003e\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ember-view\"\u003e\u003cspan class=\"sites-render-textarea\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv class=\"ember-view\"\u003e\n\u003cspan class=\"sites-render-textarea\"\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ember-view\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eParts are built to order, Please refer to header at top of page for most up to date lead times!!\u003c\/strong\u003e\u003cbr\u003e\u003cspan class=\"sites-render-textarea\"\u003e\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ember-view\"\u003e\u003cspan class=\"sites-render-textarea\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"ember846\" class=\"ember-view product-list drag-enabled row generics\"\u003e\n\u003cdiv id=\"ember1346\" class=\"ember-view col-lg-3 col-md-4 col-sm-6 col-xs-6\"\u003e\n\u003cdiv data-bindattr-1347=\"1347\" class=\"generic\"\u003e\n\u003cdiv data-bindattr-1353=\"1353\" class=\"item-label__item__thumbnail-wrapper\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Hart Fab","offers":[{"title":"Standard \/ Angled Side \/ Stock","offer_id":45008996303024,"sku":"sku-19125249376320","price":995.0,"currency_code":"USD","in_stock":true},{"title":"Standard \/ Angled Side \/ Shaved (no factory welded brake bracket)","offer_id":45008996335792,"sku":"sku-19125249409088","price":995.0,"currency_code":"USD","in_stock":true},{"title":"Single panel \/ Angled Side \/ Stock","offer_id":45008996368560,"sku":"sku-19125249605696","price":995.0,"currency_code":"USD","in_stock":true},{"title":"Single panel \/ Angled Side \/ Shaved (no factory welded brake bracket)","offer_id":45008996401328,"sku":"sku-19125249671232","price":995.0,"currency_code":"USD","in_stock":true},{"title":"Smooth\/No Bead \/ Angled Side \/ Stock","offer_id":45008996434096,"sku":"sku-40219334508579","price":945.0,"currency_code":"USD","in_stock":true},{"title":"Smooth\/No Bead \/ Angled Side \/ Shaved (no factory welded brake bracket)","offer_id":45008996466864,"sku":"sku-40219334541347","price":945.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1356\/0921\/files\/image_09e1f0f2-f5e4-4b60-9021-fdf26b8aa8cf.jpg?v=1773352601"},{"product_id":"73-87-c-10-firewall-support-brace","title":"73-87 C-10 Firewall support brace","description":"\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e1973-1987 C-10 Firewall support\/brace. If you choose not to reuse the original bracket when shaving the firewall on a 73-87 truck this brace is necessary to add the strength and support back into the firewall to eliminate flex on the master cylinder. A single layer of 18 gauge is not enough and will result in spongy pedal feel or poor braking performance. \u003c\/p\u003e\n\u003cp\u003eDesigned to be used with our firewall panels but will work with other manufacturers as well. Precision CNC cut from 1\/8” cold rolled steel with bolt, master cylinder and steering column holes. Modification or shimming of original pedal assembly may be necessary. In stock and ships within 3 business days. \u003c\/p\u003e","brand":"Hart Fab","offers":[{"title":"Round Column Hole (billet or custom mount)","offer_id":45008996106416,"sku":"sku-39859910508579","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Triangle Column Hole (Factory Style Mount)","offer_id":45008996139184,"sku":"sku-39859910541347","price":55.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1356\/0921\/files\/image_9f3f67fa-ef7c-4369-8e25-6c6be32bd09f.jpg?v=1773352601"},{"product_id":"73-87-c-10-static-drop-inner-fenders","title":"73-87 C-10 Static Drop Inner Fenders","description":"\u003cp\u003e73-87 Squarebody C10 Static drop inner fenders.  These inner fenders are designed for stock crossmember applications and some non extreme drop aftermarket crossmembers using a static drop, coil over, or airbag. These are ideal for bolt on suspensions. 5\/7 drops, QA1, ride tech coilover or air bag, etc. They've also been used in full chassis applications such as Roadster shop fast track.  \u003c\/p\u003e\n\u003cp\u003e Measuring 4 1\/4” from the fender pinch weld to the highest point of the tub these inner fenders will get you as low as you can go and still retain unmodified hood hinge on 73-80 or hood spring on 81-87. Provides and additional 3 1\/2\" clearance over original.\u003c\/p\u003e\n\u003cp\u003eThese \u003cstrong\u003eWILL NOT\u003c\/strong\u003e work with factory heat or A\/C boxes at this time. Not designed for “lay frame” or “body dropped” applications. If you have any questions about your application please contact us before ordering. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eHand crafted in house from 18 gauge steel offered in raw finish only. Included are 2 - inner fender assemblies, 2- core support mounting brackets and 1 - firewall mounting bracket. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eParts are built to order, Please refer to header at top of page for most up to date lead times!!\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Hart Fab","offers":[{"title":"81-87 \/ Standard \/ Stock","offer_id":45008997810352,"sku":"sku-31781451235363","price":995.0,"currency_code":"USD","in_stock":true},{"title":"81-87 \/ Standard \/ Shaved (no welded factory brake bracket)","offer_id":45008997843120,"sku":"sku-39874810019875","price":995.0,"currency_code":"USD","in_stock":true},{"title":"81-87 \/ Single Panel \/ Stock","offer_id":45008997875888,"sku":"sku-31793058938915","price":995.0,"currency_code":"USD","in_stock":true},{"title":"81-87 \/ Single Panel \/ Shaved (no welded factory brake bracket)","offer_id":45008997908656,"sku":"sku-39874810052643","price":995.0,"currency_code":"USD","in_stock":true},{"title":"81-87 \/ Smooth\/No Bead \/ Stock","offer_id":45008997941424,"sku":"sku-40219333885987","price":945.0,"currency_code":"USD","in_stock":true},{"title":"81-87 \/ Smooth\/No Bead \/ Shaved (no welded factory brake bracket)","offer_id":45008997974192,"sku":"sku-40219333918755","price":945.0,"currency_code":"USD","in_stock":true},{"title":"73-80 \/ Standard \/ Stock","offer_id":45008998006960,"sku":"sku-31781451268131","price":995.0,"currency_code":"USD","in_stock":true},{"title":"73-80 \/ Standard \/ Shaved (no welded factory brake bracket)","offer_id":45008998039728,"sku":"sku-39874810085411","price":995.0,"currency_code":"USD","in_stock":true},{"title":"73-80 \/ Single Panel \/ Stock","offer_id":45008998072496,"sku":"sku-31793059102755","price":995.0,"currency_code":"USD","in_stock":true},{"title":"73-80 \/ Single Panel \/ Shaved (no welded factory brake bracket)","offer_id":45008998105264,"sku":"sku-39874810118179","price":995.0,"currency_code":"USD","in_stock":true},{"title":"73-80 \/ Smooth\/No Bead \/ Stock","offer_id":45008998138032,"sku":"sku-40219333951523","price":945.0,"currency_code":"USD","in_stock":true},{"title":"73-80 \/ Smooth\/No Bead \/ Shaved (no welded factory brake bracket)","offer_id":45008998170800,"sku":"sku-40219333984291","price":945.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1356\/0921\/files\/image_76b778a4-7318-4017-8a8f-db85ac68d2d9.jpg?v=1773352601"},{"product_id":"73-87-c-10-firewall-shaver-panels","title":"73-87 C-10 Firewall Shaver panels","description":"\u003cp\u003eOur 1973-1987 C-10 firewall shaver panels feature exclusive, custom designs that are compatible with our inner fenders as well as other brands. For proper installation, we recommend cutting out the original firewall and welding on our shaver panel. The backside of the panel is marked with the locations for the steering column, master cylinder, wiper motor, and wiring harness. The beads are pushed \u003cstrong\u003eINWARDS\u003c\/strong\u003e to match the inner fenders, but can be pushed outwards upon request.\u003c\/p\u003e\n\u003cp\u003eEach set includes two 18-gauge steel pieces for the left and right sides of the firewall. \"Passenger Only\" or \"Drivers Only  Includes only \u003cstrong\u003eONE\u003c\/strong\u003e panel.\u003c\/p\u003e\n\u003cp\u003e \u003cstrong\u003ePlease note\u003c\/strong\u003e our parts are made to order and completion may take 1-3 weeks.\u003c\/p\u003e","brand":"Hart Fab","offers":[{"title":"Standard \/ Driver And Passenger","offer_id":45008997384368,"sku":"sku-40715674976291","price":170.0,"currency_code":"USD","in_stock":true},{"title":"Standard \/ Passenger ONLY","offer_id":45008997417136,"sku":"sku-39913209102371","price":100.0,"currency_code":"USD","in_stock":true},{"title":"Standard \/ Driver ONLY","offer_id":45008997449904,"sku":"sku-41941459894307","price":100.0,"currency_code":"USD","in_stock":true},{"title":"Single \/ Driver And Passenger","offer_id":45008997482672,"sku":"sku-40715675009059","price":170.0,"currency_code":"USD","in_stock":true},{"title":"Single \/ Passenger ONLY","offer_id":45008997515440,"sku":"sku-39913209135139","price":100.0,"currency_code":"USD","in_stock":true},{"title":"Single \/ Driver ONLY","offer_id":45008997548208,"sku":"sku-41941459927075","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1356\/0921\/files\/FullSizeRender_32f3be17-446f-4bad-956f-18e0047077a5.jpg?v=1773352601"},{"product_id":"79-87-c10-fuel-door-battery-pocket","title":"79-87 C10 Fuel door battery pocket","description":"\u003cp\u003eUpgrade your 1979-1987 C10's Gas door with this specially designed battery pocket. Perfect for those with relocated fuel tanks and batteries, this convenient solution adds function to previously unused space. It includes all necessary hardware and both positive and negative terminals, and requires no cutting for a direct bolt-in installation.\u003c\/p\u003e\n\u003cp\u003e For even more versatility, consider adding the optional 200A continuous and 300A surge rated battery switch. Crafted with precision using 18 gauge steel and featuring a raw finish, this pocket is compatible with square style fuel doors with removable plastic inserts for C10, 20, and 30 models.\u003c\/p\u003e\n\u003cp\u003e Usually in stock, but please allow up to 2 weeks for shipping. Any questions? Don't hesitate to inquire beforehand.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Hart Fab","offers":[{"title":"Yes \/ Driver","offer_id":45008996729008,"sku":"sku-40736505692195","price":150.0,"currency_code":"USD","in_stock":true},{"title":"Yes \/ Passenger","offer_id":45008996761776,"sku":"sku-40736506150947","price":150.0,"currency_code":"USD","in_stock":true},{"title":"Terminals Only \/ Driver","offer_id":45008996794544,"sku":"sku-40736505724963","price":140.0,"currency_code":"USD","in_stock":true},{"title":"Terminals Only \/ Passenger","offer_id":45008996827312,"sku":"sku-40736506183715","price":140.0,"currency_code":"USD","in_stock":true},{"title":"Blank (no terminals or switch) \/ Driver","offer_id":45008996860080,"sku":"sku-40749160726563","price":100.0,"currency_code":"USD","in_stock":true},{"title":"Blank (no terminals or switch) \/ Passenger","offer_id":45008996892848,"sku":"sku-40749160759331","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1356\/0921\/files\/IMG-6295.png?v=1773352604"},{"product_id":"73-87-c-10-composite-inner-fenders","title":"73-87 C-10 Composite Inner Fenders","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e73-87 C10 Composite inner fenders. We've teamed up with the best in the composites industry to offer a direct replica of our popular steel inner fenders.  Now available in cost effective fiberglass or stylish and super light carbon fiber.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eFiberglass come in gloss black gelcoat and carbon fiber are available in gloss finish only. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e73-87 Squarebody C10 Static drop inner fenders.  These inner fenders are designed for stock crossmember applications and some non extreme drop aftermarket crossmembers using a static drop, coil over, or airbag. These are ideal for bolt on suspensions. 5\/7 drops, QA1, ride tech coilover or air bag, etc. They've also been used in full chassis applications such as Roadster shop fast track.  \u003c\/p\u003e\n\u003cp\u003e Measuring 4 1\/4” from the fender pinch weld to the highest point of the tub these inner fenders will get you as low as you can go and still retain unmodified hood hinge on 73-80 or hood spring on 81-87. Provides and additional 3 1\/2\" clearance over original.\u003c\/p\u003e\n\u003cp\u003eThese \u003cstrong\u003eWILL NOT\u003c\/strong\u003e work with factory heat or A\/C boxes at this time. Not designed for “lay frame” or “body dropped” applications. If you have any questions about your application please contact us before ordering. \u003c\/p\u003e\n\u003cp\u003eThese were molded off our 73-80 Version. If Installing in a 81-87 Application minor additional trimming of the side panel may be necessary. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMatte\/Satin Finish is no longer available\u003c\/strong\u003e. We recommend re-clearing with a quality automotive style clear if this is the look you desire. \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e$5 shipping cont. US.  If shown \"In Stock\" items are available to ship within 1 week of order. For all out of stock options please contact us to get on the wait list. \u003c\/p\u003e","brand":"Hart Fab","offers":[{"title":"Fiberglass","offer_id":45008996499632,"sku":"sku-40088192778275","price":895.0,"currency_code":"USD","in_stock":false},{"title":"Carbon Fiber Gloss","offer_id":45008996532400,"sku":"sku-40088192811043","price":1395.0,"currency_code":"USD","in_stock":true},{"title":"Carbon fiber Matte","offer_id":45008996565168,"sku":"sku-40088192843811","price":1495.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1356\/0921\/files\/82DC6844-337A-4E14-A989-0E3DAB9B9273.jpg?v=1773352602"},{"product_id":"73-87-c-10-firewall-splash-panels","title":"73-87 C-10 Firewall Splash Panels","description":"\u003cp\u003e \u003c\/p\u003e\n\u003cdiv class=\"generic-label-header\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-6 col-md-8 col-xs-10 col-lg-offset-3 col-md-offset-2 col-xs-offset-1\"\u003e\n\u003cdiv class=\"section-description\"\u003e\n\u003cdiv class=\"copy\"\u003e\n\u003cdiv id=\"ember865\" class=\"ember-view l-sites__edit-or-render is-rendering\"\u003e\n\u003cdiv data-bindattr-867=\"867\" data-ember-action=\"868\" class=\"l-sites__edit-or-render__render is-hover-enabled\"\u003e\n\u003cdiv id=\"ember870\" class=\"ember-view\"\u003e\u003cspan class=\"sites-render-textarea\"\u003eClean up the look of your wheel wells from the outside using these filler panels. Simple bolt in installation behind the front tires of 73-87 C10 trucks using original mounting holes. Bead rolled and made of 18 gauge steel offered in raw finish only. Designed to be used with our inner fenders but also can be used with other options. Please allow 2 to 4 weeks for delivery. Includes 1 pair of splash panels. \u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"ember874\" class=\"ember-view product-list drag-enabled row generics\"\u003e\n\u003cdiv id=\"ember1364\" class=\"ember-view col-lg-3 col-md-4 col-sm-6 col-xs-6\"\u003e\n\u003cdiv data-bindattr-1365=\"1365\" class=\"generic\"\u003e\n\u003cdiv data-bindattr-1371=\"1371\" class=\"item-label__item__thumbnail-wrapper\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Hart Fab","offers":[{"title":"73-80","offer_id":45008998236336,"sku":"sku-15888665280576","price":75.0,"currency_code":"USD","in_stock":true},{"title":"81-87","offer_id":45008998269104,"sku":"sku-15888665378880","price":75.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1356\/0921\/files\/20161008_124407.jpg?v=1773352601"},{"product_id":"billet-steering-column-firewall-mount","title":"Billet Steering column firewall mount","description":"\u003cp\u003eBillet steering column floor\/firewall mount. This is the cleanest and easiest way to mount the bottom of your column through the firewall. All of our brackets and firewall panels are designed to use.\u003c\/p\u003e\n\u003cp\u003ePolished billet aluminum finish. Comes with layout\/drill template for ease of installation.  2\"  or 2 1\/4\" inside diameter, 4\" outside.  Please verify column size before ordering. \u003c\/p\u003e\n\u003cp\u003eThese are intended to be used with aftermarket column or factory floor shift.  These will not work with factory column shift, as the shift arm is not removable.\u003c\/p\u003e\n\u003cp\u003eIncludes (1) billet mount, (1) drill template, (3) mounting screws.\u003c\/p\u003e\n\u003cp\u003eIn stock!! Ships within 3 Business days. \u003c\/p\u003e","brand":"Hart Fab","offers":[{"title":"2 Inch","offer_id":45008998957232,"sku":"sku-41027262545955","price":55.0,"currency_code":"USD","in_stock":true},{"title":"2 1\/4 Inch","offer_id":45008998990000,"sku":"sku-41027262578723","price":55.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1356\/0921\/files\/FullSizeRender_3e926e8b-2931-4161-bf14-419225b3b446.png?v=1773352604"},{"product_id":"ls-swap-mounts","title":"LS Swap Mounts","description":"\u003cp\u003eSwap your LS based motor into your C10. Will work with factory truck or Holley oil pans.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1\/4″ Plate Construction\u003c\/li\u003e\n\u003cli\u003e2 1\/2 Inches of Adjustment\u003c\/li\u003e\n\u003cli\u003eBolts to Factory Frame Mounts\u003c\/li\u003e\n\u003cli\u003eTotal Product Weight 7-lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLeft \u0026amp; Right Engine Mounts\u003c\/li\u003e\n\u003cli\u003eGrade 8 Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e73-87 Chevy\/GMC\u003c\/li\u003e\n\u003cli\u003e2wd Truck, Suburban, \u0026amp; Blazer\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Tinworks Suspension","offers":[{"title":"Default Title","offer_id":45026223882416,"sku":"7398-SBOBS-AMMLS","price":85.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1356\/0921\/files\/399_tinworks-fabrication-iowa-classic-chevy-parts-custom-shop-3.jpg?v=1774472765"},{"product_id":"detroit-speed-billet-tailgate-kit","title":"Detroit Speed Billet Tailgate Kit","description":"\u003cp\u003eModernize the fit, function, and appearance of your 1973-1976 1\u003csup\u003est\u003c\/sup\u003e\u003cspan\u003e \u003c\/span\u003eDesign Chevrolet and GMC tailgate with Detroit Speed’s Billet Tailgate Kit. Designed as a complete system, this kit includes Detroit Speed’s precision-engineered Billet Tailgate Handle, Delrin Trunnions, and Rubber-Coated Support Cables — each crafted to eliminate the fitment flaws, rattles, and wear that plague factory tailgates.\u003c\/p\u003e\n\u003cp\u003eWhether you’re finishing a high-end restoration or refining your weekend driver, this kit transforms your truck’s tailgate into a modern, refined component without sacrificing its classic styling. Every piece is crafted from premium materials, featuring billet aluminum and stainless-steel construction for durability, corrosion resistance, and show-quality finish.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eOEM-INSPIRED. DETROIT SPEED PERFECTED.\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eDetroit Speed’s Billet Tailgate Kit is more than an aesthetic upgrade — it’s a performance-driven system designed for precision alignment and long-term reliability.\u003c\/p\u003e\n\u003cp\u003eThe billet aluminum handle delivers smooth, confident operation with a timeless design that complements your truck’s vintage appeal. Delrin trunnions feature integrated rubber isolation to reduce vibration and eliminate tailgate rattle, while the rubber-coated support cables offer quiet, stable support and a cleaner appearance than stock steel rods.\u003c\/p\u003e\n\u003cp\u003eFrom the materials to the geometry, every detail has been engineered to provide OEM-level function with custom-level precision and craftsmanship — the hallmark of Detroit Speed.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eBOLT-IN CONVENIENCE\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThis complete tailgate system installs directly using factory mounting points — no cutting, drilling, or fabrication required. Each component is designed for a perfect fit and includes stainless hardware for a high-quality installation that lasts.\u003c\/p\u003e\n\u003cp\u003eThe kit’s built-in adjustability allows you to fine-tune tailgate alignment and closing action, ensuring smooth operation and proper panel gaps. Builders, restorers, and enthusiasts alike will appreciate the balance of modern refinement and vintage authenticity that Detroit Speed delivers in this easy bolt-on package.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eFEATURES \u0026amp; BENEFITS\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete Tailgate Upgrade Kit\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– Includes Billet Handle, Delrin Trunnions, and Rubber-Coated Support Cables.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBillet Aluminum \u0026amp; Stainless-Steel Construction\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– Engineered for strength, precision, and corrosion resistance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDelrin Trunnions with Rubber Isolation\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– Eliminates vibration and tailgate rattle common in classic trucks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRubber-Coated Support Cables\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– Provide quiet operation and modern appearance versus steel rods.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmooth Operation\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– Precision geometry ensures consistent, effortless tailgate movement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Fitment\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– Allows precise panel alignment and tailgate closure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy Bolt-In Installation\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– Direct-fit system requires no cutting, drilling, or welding.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRefined Finish\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– Anodized and stainless components resist corrosion and add show-quality appeal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePremium Hardware Included\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– Stainless hardware kit ensures a secure, long-lasting installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerfect for Finished Builds\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– Ideal for restorations, restomods, or custom trucks seeking next-level detail.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eWHAT’S INCLUDED\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBillet Aluminum Tailgate Handles (012002DS)\u003c\/li\u003e\n\u003cli\u003eDelrin Trunnions (012012DS)\u003c\/li\u003e\n\u003cli\u003eRubber Coated Support Cables (012021DS) \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eFITMENT NOTES\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDirect fit for 1973-1976 Chevrolet and GMC Trucks (1st Design)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect bolt-in installation\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– no cutting, welding, or drilling required.\u003c\/li\u003e\n\u003cli\u003eIncludes\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eBillet Handle, Delrin Trunnions, Rubber-Coated Support Cables\u003c\/strong\u003e, and\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003estainless hardware kit\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eCompatible with\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003efactory-style tailgates and latches\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eIdeal for\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003erestored, custom, and patina-finish builds\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eseeking next-level refinement and precision fitment.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Detroit Speed","offers":[{"title":"Default Title","offer_id":45097616081072,"sku":"012031DS","price":414.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1356\/0921\/files\/012031-32DS-001__40369_1.webp?v=1778254875"},{"product_id":"detroit-speed-tailgate-cables-76-86-c-k-87-91-r-v-trucks","title":"Detroit Speed Tailgate Cables 76-86 C\/K, 87-91 R\/V Trucks","description":"\u003cp\u003eUpgrade the function and finish of your 1976-1986 Chevrolet and GMC or your 1987-1991 R and V-Series tailgate with Detroit Speed Tailgate Cables. Designed to replace outdated steel support rods, these modern rubber-coated cables provide a cleaner appearance and eliminate the rattle and vibration that plague vintage tailgates.\u003c\/p\u003e\n\u003cp\u003ePrecision-engineered with stainless steel latch strikers and hardware, this setup delivers the strength and durability your build demands — all while adding a refined, custom look. Whether you’re restoring a workhorse or perfecting a show-stopping restomod, Detroit Speed tailgate cables bring modern functionality to classic style.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eOEM-INSPIRED. DETROIT SPEED PERFECTED.\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eEach component of the Detroit Speed Tailgate Cable Kit is purpose-built for long-term durability and modern refinement. The stainless steel latch strikers ensure secure engagement, while the stainless cables with rubber coating offer quiet, smooth support.\u003c\/p\u003e\n\u003cp\u003eThis combination not only improves tailgate function but also gives your truck a modernized aesthetic. The result: a tailgate that operates silently, aligns precisely, and looks as good as the rest of your build.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eBOLT-IN CONVENIENCE\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eDetroit Speed designed these tailgate cables for simple, no-modification installation. Each kit includes stamped stainless latch strikers, precision cables, and a complete stainless hardware kit for quick bolt-in assembly.\u003c\/p\u003e\n\u003cp\u003eThe adjustable design allows you to fine-tune tailgate angle and alignment, ensuring a perfect fit every time. Builders will appreciate the straightforward installation process and the immediate improvement in both function and appearance — all without fabrication or welding.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eFEATURES \u0026amp; BENEFITS\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStamped Stainless Steel Latch Strikers\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– Precision-formed for strength and long-term reliability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRubber-Coated Stainless Cables\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– Eliminate rattles and reduce vibration compared to factory steel rods.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Fitment\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– Fine-tune tailgate alignment for perfect closure and support.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStainless Hardware Kit Included\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– All necessary mounting hardware provided for easy installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorrosion-Resistant Finishes\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– No painting required; maintains a clean, modern appearance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect Bolt-In Installation\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– No cutting, drilling, or welding required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePremium Aesthetic Upgrade\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– Adds a modern, high-end detail to classic truck builds.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngineered by Detroit Speed\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– Proven quality, precision fitment, and modern performance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eFITMENT NOTES\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDirect fit for 1976-1986 Chevrolet and GMC C\/K Trucks, 1987-1991 Chevrolet and GMC R\/V Trucks\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect bolt-in installation\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– no cutting, drilling, or welding required.\u003c\/li\u003e\n\u003cli\u003eIncludes\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003estainless hardware, latch strikers, and coated cable set\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eWorks with\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003efactory or upgraded tailgates\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eIdeal for\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003erestored, custom, and patina-finish builds\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eseeking premium refinement and function.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Detroit Speed","offers":[{"title":"Default Title","offer_id":45097668018352,"sku":"012022DS","price":69.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1356\/0921\/files\/012021-22DS-TAILGATE-CABLE-001__51458.webp?v=1778256092"},{"product_id":"detroit-speed-tailgate-cables-73-76-c-k-trucks","title":"Detroit Speed Tailgate Cables 73-76 C\/K Trucks","description":"\u003cp\u003eUpgrade the function and finish of your 1976-1986 Chevrolet and GMC or your 1987-1991 R and V-Series tailgate with Detroit Speed Tailgate Cables. Designed to replace outdated steel support rods, these modern rubber-coated cables provide a cleaner appearance and eliminate the rattle and vibration that plague vintage tailgates.\u003c\/p\u003e\n\u003cp\u003ePrecision-engineered with stainless steel latch strikers and hardware, this setup delivers the strength and durability your build demands — all while adding a refined, custom look. Whether you’re restoring a workhorse or perfecting a show-stopping restomod, Detroit Speed tailgate cables bring modern functionality to classic style.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eOEM-INSPIRED. DETROIT SPEED PERFECTED.\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eEach component of the Detroit Speed Tailgate Cable Kit is purpose-built for long-term durability and modern refinement. The stainless steel latch strikers ensure secure engagement, while the stainless cables with rubber coating offer quiet, smooth support.\u003c\/p\u003e\n\u003cp\u003eThis combination not only improves tailgate function but also gives your truck a modernized aesthetic. The result: a tailgate that operates silently, aligns precisely, and looks as good as the rest of your build.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eBOLT-IN CONVENIENCE\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eDetroit Speed designed these tailgate cables for simple, no-modification installation. Each kit includes stamped stainless latch strikers, precision cables, and a complete stainless hardware kit for quick bolt-in assembly.\u003c\/p\u003e\n\u003cp\u003eThe adjustable design allows you to fine-tune tailgate angle and alignment, ensuring a perfect fit every time. Builders will appreciate the straightforward installation process and the immediate improvement in both function and appearance — all without fabrication or welding.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eFEATURES \u0026amp; BENEFITS\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStamped Stainless Steel Latch Strikers\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– Precision-formed for strength and long-term reliability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRubber-Coated Stainless Cables\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– Eliminate rattles and reduce vibration compared to factory steel rods.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Fitment\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– Fine-tune tailgate alignment for perfect closure and support.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStainless Hardware Kit Included\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– All necessary mounting hardware provided for easy installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorrosion-Resistant Finishes\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– No painting required; maintains a clean, modern appearance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect Bolt-In Installation\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– No cutting, drilling, or welding required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePremium Aesthetic Upgrade\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– Adds a modern, high-end detail to classic truck builds.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngineered by Detroit Speed\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– Proven quality, precision fitment, and modern performance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eFITMENT NOTES\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDirect fit for 1976-1986 Chevrolet and GMC C\/K Trucks, 1987-1991 Chevrolet and GMC R\/V Trucks\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect bolt-in installation\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– no cutting, drilling, or welding required.\u003c\/li\u003e\n\u003cli\u003eIncludes\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003estainless hardware, latch strikers, and coated cable set\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eWorks with\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003efactory or upgraded tailgates\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eIdeal for\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003erestored, custom, and patina-finish builds\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eseeking premium refinement and function.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Detroit Speed","offers":[{"title":"Default Title","offer_id":45097707634864,"sku":"012021DS","price":69.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1356\/0921\/files\/Screenshot2026-05-13at10.11.52AM.png?v=1778685119"},{"product_id":"detroit-speed-billet-tailgate-handle-81-86-c-k-87-91-r-v-trucks","title":"Detroit Speed Billet Tailgate Handle  81-86 C\/K, 87-91 R\/V Trucks","description":"\u003cdiv class=\"tabs-contents\"\u003e\n\u003cdiv class=\"tab-content is-active\" id=\"tab-description\"\u003e\n\u003cp\u003eModernize the fit, function, and appearance of your 1976-1986 Chevrolet and GMC or your 1987-1991 R and V-Series tailgate with Detroit Speed Billet Tailgate Handles. Crafted from precision-machined billet aluminum, these handles bring a refined, high-end touch to any build - from freshly restored classics to patina shop trucks. Designed to eliminate the sloppy fit, binding, and misalignment common with factory handles, this upgrade delivers a smoother, cleaner operation with a timeless look that completes your build’s rear view.\u003c\/p\u003e\n\u003cp\u003eWhether you’re chasing concours-level detail or looking for the next finishing piece on your driver-quality truck, Detroit Speed’s billet handle adds both form and function with effortless installation.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eOEM-INSPIRED. DETROIT SPEED PERFECTED.\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eEach Detroit Speed Billet Tailgate Handle is designed to provide a superior fit and feel compared to OEM and other aftermarket options. The billet aluminum construction ensures consistent geometry, while nylon pivots guarantee smooth, rattle-free performance. Added adjustability allows you to dial in exact placement for a seamless look within the tailgate opening - a refinement that sets your truck apart from the rest.\u003c\/p\u003e\n\u003cp\u003eThe handle face can also be removed for custom paint or powder coating, offering personalization options that align with your truck’s finish - perfect for color-matched or patina builds.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eBOLT-IN CONVENIENCE\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward and requires no permanent modifications to the tailgate. The Detroit Speed handle assembly includes a complete stainless hardware kit and rubber bump stops, ensuring a clean, secure, and quiet fit. Builders and restorers alike will appreciate the plug-and-play design that delivers a premium touch without fabrication or guesswork.\u003c\/p\u003e\n\u003cp\u003eOnce installed, the handle operates smoothly and consistently, complementing Detroit Speed’s broader commitment to precision and quality across every component.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eFEATURES \u0026amp; BENEFITS\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBillet Aluminum and Stainless-Steel Construction\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– Built for strength, corrosion resistance, and premium aesthetics.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnodized Aluminum Finish\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– Protects against wear while maintaining a high-end appearance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmooth, Refined Operation\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– Engineered geometry eliminates binding and misalignment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Fitment\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– Allows for precise handle alignment within the tailgate opening.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoise-Free Design\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– Nylon latch rod retainers and rubber stops eliminate rattles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete Installation Kit\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– Includes stainless hardware and all required accessories.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustomizable Face Plate\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– Removable handle face allows color-matching or custom finishes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy, Bolt-In Installation\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– No cutting, welding, or modification required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eFITMENT NOTES\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDirect fit for 1981-1986 Chevrolet and GMC C\/K Trucks, 1987-1991 Chevrolet and GMC R\/V Trucks\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt-in installation\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– no fabrication or modification required.\u003c\/li\u003e\n\u003cli\u003eCompatible with\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003efactory tailgate latch mechanisms\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eIncludes\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ecomplete stainless steel hardware kit\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eand installation accessories.\u003c\/li\u003e\n\u003cli\u003eIdeal for\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003erestored, custom, or patina-finish trucks\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eseeking refined details.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Detroit Speed","offers":[{"title":"Default Title","offer_id":45097916104880,"sku":"012003DS","price":249.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1356\/0921\/files\/Screenshot2026-05-13at10.05.58AM.png?v=1778684767"},{"product_id":"detroit-speed-billet-tailgate-kit-81-86-c-k-87-91-r-v-trucks","title":"Detroit Speed Billet Tailgate Kit 81-86 C\/K, 87-91 R\/V Trucks","description":"\u003cdiv class=\"tabs-contents\"\u003e\n\u003cdiv class=\"tab-content is-active\" id=\"tab-description\"\u003e\n\u003cp\u003eModernize the fit, function, and appearance of your 1976-1986 Chevrolet and GMC or your 1987-1991 R and V-Series tailgate with Detroit Speed’s Billet Tailgate Kit. Designed as a complete system, this kit includes Detroit Speed’s precision-engineered Billet Tailgate Handle, Delrin Trunnions, and Rubber-Coated Support Cables — each crafted to eliminate the fitment flaws, rattles, and wear that plague factory tailgates.\u003c\/p\u003e\n\u003cp\u003eWhether you’re finishing a high-end restoration or refining your weekend driver, this kit transforms your truck’s tailgate into a modern, refined component without sacrificing its classic styling. Every piece is crafted from premium materials, featuring billet aluminum and stainless-steel construction for durability, corrosion resistance, and show-quality finish.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eOEM-INSPIRED. DETROIT SPEED PERFECTED.\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eDetroit Speed’s Billet Tailgate Kit is more than an aesthetic upgrade — it’s a performance-driven system designed for precision alignment and long-term reliability.\u003c\/p\u003e\n\u003cp\u003eThe billet aluminum handle delivers smooth, confident operation with a timeless design that complements your truck’s vintage appeal. Delrin trunnions feature integrated rubber isolation to reduce vibration and eliminate tailgate rattle, while the rubber-coated support cables offer quiet, stable support and a cleaner appearance than stock steel rods.\u003c\/p\u003e\n\u003cp\u003eFrom the materials to the geometry, every detail has been engineered to provide OEM-level function with custom-level precision and craftsmanship — the hallmark of Detroit Speed.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eBOLT-IN CONVENIENCE\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThis complete tailgate system installs directly using factory mounting points — no cutting, drilling, or fabrication required. Each component is designed for a perfect fit and includes stainless hardware for a high-quality installation that lasts.\u003c\/p\u003e\n\u003cp\u003eThe kit’s built-in adjustability allows you to fine-tune tailgate alignment and closing action, ensuring smooth operation and proper panel gaps. Builders, restorers, and enthusiasts alike will appreciate the balance of modern refinement and vintage authenticity that Detroit Speed delivers in this easy bolt-on package.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eFEATURES \u0026amp; BENEFITS\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete Tailgate Upgrade Kit\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– Includes Billet Handle, Delrin Trunnions, and Rubber-Coated Support Cables.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBillet Aluminum \u0026amp; Stainless-Steel Construction\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– Engineered for strength, precision, and corrosion resistance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDelrin Trunnions with Rubber Isolation\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– Eliminates vibration and tailgate rattle common in classic trucks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRubber-Coated Support Cables\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– Provide quiet operation and modern appearance versus steel rods.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmooth Operation\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– Precision geometry ensures consistent, effortless tailgate movement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Fitment\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– Allows precise panel alignment and tailgate closure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy Bolt-In Installation\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– Direct-fit system requires no cutting, drilling, or welding.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRefined Finish\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– Anodized and stainless components resist corrosion and add show-quality appeal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePremium Hardware Included\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– Stainless hardware kit ensures a secure, long-lasting installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerfect for Finished Builds\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– Ideal for restorations, restomods, or custom trucks seeking next-level detail.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eWHAT’S INCLUDED\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBillet Aluminum Tailgate Handles (012003DS)\u003c\/li\u003e\n\u003cli\u003eDelrin Trunnions (012013DS)\u003c\/li\u003e\n\u003cli\u003eRubber Coated Support Cables (012022DS) \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eFITMENT NOTES\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDirect fit for 1981-1986 Chevrolet and GMC C\/K Trucks, 1987-1991 Chevrolet and GMC R\/V Trucks,\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect bolt-in installation\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– no cutting, welding, or drilling required.\u003c\/li\u003e\n\u003cli\u003eIncludes\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eBillet Handle, Delrin Trunnions, Rubber-Coated Support Cables\u003c\/strong\u003e, and\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003estainless hardware kit\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eCompatible with\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003efactory-style tailgates and latches\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eIdeal for\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003erestored, custom, and patina-finish builds\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eseeking next-level refinement and precision fitment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Detroit Speed","offers":[{"title":"Default Title","offer_id":45108936278192,"sku":"012033DS","price":414.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1356\/0921\/files\/012033DS-001__11344.webp?v=1778528582"},{"product_id":"detroit-speed-billet-tailgate-handle-73-80-c-k-trucks","title":"Detroit Speed Billet Tailgate Handle 73-80 C\/K Trucks","description":"\u003cp\u003eModernize the fit, function, and appearance of your 1973-1980 Chevrolet or GMC tailgate with Detroit Speed Billet Tailgate Handles. Crafted from precision-machined billet aluminum, these handles bring a refined, high-end touch \u003cimg\u003eto any build - from freshly restored classics to patina shop trucks. Designed to eliminate the sloppy fit, binding, and misalignment common with factory handles, this upgrade delivers a smoother, cleaner operation with a timeless look that completes your build’s rear view.\u003c\/p\u003e\n\u003cp\u003eWhether you’re chasing concours-level detail or looking for the next finishing piece on your driver-quality truck, Detroit Speed’s billet handle adds both form and function with effortless installation.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eOEM-INSPIRED. DETROIT SPEED PERFECTED.\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eEach Detroit Speed Billet Tailgate Handle is designed to provide a superior fit and feel compared to OEM and other aftermarket options. The billet aluminum construction ensures consistent geometry, while nylon pivots guarantee smooth, rattle-free performance. Added adjustability allows you to dial in exact placement for a seamless look within the tailgate opening - a refinement that sets your truck apart from the rest.\u003c\/p\u003e\n\u003cp\u003eThe handle face can also be removed for custom paint or powder coating, offering personalization options that align with your truck’s finish - perfect for color-matched or patina builds.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eBOLT-IN CONVENIENCE\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward and requires no permanent modifications to the tailgate. The Detroit Speed handle assembly includes a complete stainless hardware kit and rubber bump stops, ensuring a clean, secure, and quiet fit. Builders and restorers alike will appreciate the plug-and-play design that delivers a premium touch without fabrication or guesswork.\u003c\/p\u003e\n\u003cp\u003eOnce installed, the handle operates smoothly and consistently, complementing Detroit Speed’s broader commitment to precision and quality across every component.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eFEATURES \u0026amp; BENFITS\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBillet Aluminum and Stainless-Steel Construction\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– Built for strength, corrosion resistance, and premium aesthetics.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnodized Aluminum Finish\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– Protects against wear while maintaining a high-end appearance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmooth, Refined Operation\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– Engineered geometry eliminates binding and misalignment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Fitment\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– Allows for precise handle alignment within the tailgate opening.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoise-Free Design\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– Nylon latch rod retainers and rubber stops eliminate rattles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete Installation Kit\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– Includes stainless hardware and all required accessories.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustomizable Face Plate\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– Removable handle face allows color-matching or custom finishes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy, Bolt-In Installation\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– No cutting, welding, or modification required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eFITMENT NOTES\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDirect fit for 1973-1980 Chevrolet and GMC Trucks\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt-in installation\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– no fabrication or modification required.\u003c\/li\u003e\n\u003cli\u003eCompatible with\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003efactory tailgate latch mechanisms\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eIncludes\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ecomplete stainless steel hardware kit\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eand installation accessories.\u003c\/li\u003e\n\u003cli\u003eIdeal for\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003erestored, custom, or patina-finish trucks\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eseeking refined details.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Detroit Speed","offers":[{"title":"Default Title","offer_id":45108962033840,"sku":"012002DS","price":249.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1356\/0921\/files\/Screenshot2026-05-14at4.42.03PM.png?v=1778794961"},{"product_id":"detroit-speed-billet-tailgate-kit-76-80-c-k-trucks","title":"Detroit Speed Billet Tailgate Kit 76-80 C\/K Trucks","description":"\u003cul class=\"tabs\" data-tab=\"\"\u003e\n\u003cli class=\"tab is-active\"\u003e\u003ca class=\"tab-title\" href=\"https:\/\/detroitspeed.com\/c10\/detroit-speed-billet-tailgate-kit-76-80-c-k-012032ds\/#tab-description\"\u003eDescription\u003c\/a\u003e\u003c\/li\u003e\n\u003cli class=\"tab\"\u003e\u003ca class=\"tab-title\" href=\"https:\/\/detroitspeed.com\/c10\/detroit-speed-billet-tailgate-kit-76-80-c-k-012032ds\/#tab-fitment\"\u003eFitment\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"tabs-contents\"\u003e\n\u003cdiv class=\"tab-content is-active\" id=\"tab-description\"\u003e\n\u003cp\u003eModernize the fit, function, and appearance of your 1976-1980 Chevrolet and GMC tailgate with Detroit Speed’s Billet Tailgate Kit. Designed as a complete system, this kit includes Detroit Speed’s precision-engineered Billet Tailgate Handle, Delrin Trunnions, and Rubber-Coated Support Cables — each crafted to eliminate the fitment flaws, rattles, and wear that plague factory tailgates.\u003c\/p\u003e\n\u003cp\u003eWhether you’re finishing a high-end restoration or refining your weekend driver, this kit transforms your truck’s tailgate into a modern, refined component without sacrificing its classic styling. Every piece is crafted from premium materials, featuring billet aluminum and stainless-steel construction for durability, corrosion resistance, and show-quality finish.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eOEM-INSPIRED. DETROIT SPEED PERFECTED.\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eDetroit Speed’s Billet Tailgate Kit is more than an aesthetic upgrade — it’s a performance-driven system designed for precision alignment and long-term reliability.\u003c\/p\u003e\n\u003cp\u003eThe billet aluminum handle delivers smooth, confident operation with a timeless design that complements your truck’s vintage appeal. Delrin trunnions feature integrated rubber isolation to reduce vibration and eliminate tailgate rattle, while the rubber-coated support cables offer quiet, stable support and a cleaner appearance than stock steel rods.\u003c\/p\u003e\n\u003cp\u003eFrom the materials to the geometry, every detail has been engineered to provide OEM-level function with custom-level precision and craftsmanship — the hallmark of Detroit Speed.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eBOLT-IN CONVENIENCE\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThis complete tailgate system installs directly using factory mounting points — no cutting, drilling, or fabrication required. Each component is designed for a perfect fit and includes stainless hardware for a high-quality installation that lasts.\u003c\/p\u003e\n\u003cp\u003eThe kit’s built-in adjustability allows you to fine-tune tailgate alignment and closing action, ensuring smooth operation and proper panel gaps. Builders, restorers, and enthusiasts alike will appreciate the balance of modern refinement and vintage authenticity that Detroit Speed delivers in this easy bolt-on package.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eFEATURES \u0026amp; BENEFITS\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete Tailgate Upgrade Kit\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– Includes Billet Handle, Delrin Trunnions, and Rubber-Coated Support Cables.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBillet Aluminum \u0026amp; Stainless-Steel Construction\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– Engineered for strength, precision, and corrosion resistance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDelrin Trunnions with Rubber Isolation\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– Eliminates vibration and tailgate rattle common in classic trucks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRubber-Coated Support Cables\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– Provide quiet operation and modern appearance versus steel rods.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmooth Operation\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– Precision geometry ensures consistent, effortless tailgate movement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Fitment\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– Allows precise panel alignment and tailgate closure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy Bolt-In Installation\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– Direct-fit system requires no cutting, drilling, or welding.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRefined Finish\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– Anodized and stainless components resist corrosion and add show-quality appeal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePremium Hardware Included\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– Stainless hardware kit ensures a secure, long-lasting installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerfect for Finished Builds\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– Ideal for restorations, restomods, or custom trucks seeking next-level detail.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eWHAT’S INCLUDED\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBillet Aluminum Tailgate Handles (012002DS)\u003c\/li\u003e\n\u003cli\u003eDelrin Trunnions (012012DS)\u003c\/li\u003e\n\u003cli\u003eRubber Coated Support Cables (012022DS) \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eFITMENT NOTES\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDirect fit for 1976-1980 Chevrolet and GMC Trucks\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect bolt-in installation\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– no cutting, welding, or drilling required.\u003c\/li\u003e\n\u003cli\u003eIncludes\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eBillet Handle, Delrin Trunnions, Rubber-Coated Support Cables\u003c\/strong\u003e, and\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003estainless hardware kit\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eCompatible with\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003efactory-style tailgates and latches\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eIdeal for\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003erestored, custom, and patina-finish builds\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eseeking next-level refinement and precision fitment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Detroit Speed","offers":[{"title":"Default Title","offer_id":45108963705008,"sku":"012032DS","price":414.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1356\/0921\/files\/Screenshot2026-05-13at7.57.33AM.png?v=1778677062"}],"url":"https:\/\/spiritandspeed.com\/collections\/73-87-c10-body-exterior.oembed","provider":"Level 7 Motorsports","version":"1.0","type":"link"}